400mm Width Hot Dipped Galvanized Cable Tray 75mm Deep Impact Resistant UL Listed
Product Details
400mm Width Galvanized Cable Tray
,Impact Resistant Galvanized Cable Tray
,UL Listed Galvanized Cable Trunking
On refurbishment and ceiling work, tray weight drives installation effort. BENDIN lightweight impact resistant galvanized cable trays use an optimised light-gauge profile that two fitters can lift and position without mechanical aids.
Despite the low weight, the side rails are reinforced at the splice and load points, so the tray resists knocks and impact during handling and service.
The light profile still carries up to 60 kg/m over normal spans, covering lighting, data and small power circuits.
Hot dip galvanizing after fabrication protects the thin sections, where a coating failure would matter most, and deburred edges protect cable insulation.
Typical uses include office fit-outs, data rooms, retail ceilings and renovation projects where access and weight are constrained.
| Certificate Held | Compliance Status |
|---|---|
| CE | CE conformity, EN 61537 cable tray systems - declared |
| TUV | Tested - held |
| ISO 9001:2015 | Quality management system - certified |
| UL | Tested - held |
| NEMA VE 1 / CSA | Compliant |
| Parameter | Specification |
|---|---|
| Weight | Lightweight profile |
| Impact Resistance | Reinforced side rails |
| Material | Galvanized steel |
| Finish | Hot dip galvanized |
| Width Range | 50-400 mm |
| Side Rail Height | 25-75 mm |
| Standard Length | 2 m / 3 m |
| Load Class | Up to 60 kg/m |
BENDIN balances gauge and stiffness so the tray is light without being flimsy. We can supply samples and load data so contractors can confirm handling and performance before ordering.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
