Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration

High Strength Wire Cable Trays with Flexible Design for Custom On-Site Configuration

1. Core Functional Advantages

BENDIN High Strength Wire Cable Tray combines a flexible design with heavy-duty steel wire construction. Strong enough for demanding loads, it can still be cut, bent, and configured on site for custom layouts, giving projects the freedom to adjust without losing structural integrity. Field adaptation reduces bespoke parts and off-cut waste, and the tray keeps its strength and shape even after modification, so custom routes perform exactly like factory-assembled ones.

2. Application Scenarios and Certification Requirements

High-strength flexible trays suit complex industrial layouts, retrofit and renovation, phased projects, and special plant equipment where no standard kit fits. Certification is provided for the destination market — IEC/EN/BS/NF/DIN 61537 and CE/RoHS for Europe, NEMA VE1/VE2 with NEC 392 and UL for North America, and CCC, BIS, SASO/SABER, or JIS where required. BENDIN supplies a wide accessory range, field-modification guidance, and test reports.

3. Specification Types and Suitability

BENDIN high-strength flexible trays are offered in heights of 50–150 mm, widths of 50–600 mm, and standard 3 m sections, with wire diameters of 3.5–6 mm. A wide range of bends, tees, crossovers, and couplers supports custom layouts, and heavier wire sections are available where the configured route must carry high loads. Stainless and galvanized options suit the environment.

4. Installation Considerations

BENDIN trays can be cut and bent on site to follow custom routes; deburr cut ends and repair galvanized edges with cold galvanizing compound. Re-join modified sections with couplers and place supports within 0.6 m of every cut, bend, or fitting. Support spacing of 1.5–2.0 m is typical, reduced at heavy loads. Verify load capacity for any non-standard configuration before loading.