Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
Product Details
Long Life Galvanized Steel Cable Tray
,Heavy Duty Galvanized Steel Cable Tray
,Galvanized Cable Trunking Heavy Duty
Where replacement means shutting down a plant, service life matters more than first cost. BENDIN long life heavy duty galvanized cable trays combine heavy-gauge steel and a 65-85 um zinc coating for 25+ years of maintenance-free support.
Reinforced side rails and a stiffened base carry up to 180 kg/m over spans up to 6 m, keeping deflection within limits even with dense power bundles.
Galvanizing after fabrication coats every cut and hole, so the corrosion clock does not start at unprotected edges. The heavy section also resists mechanical damage during service.
We supply 2 m and 3 m lengths with heavy-duty splice plates and supports matched to the load, so the whole run shares the same service life.
Applications include power stations, steel mills, mines and infrastructure tunnels where access for replacement is difficult and costly.
| Certificate Held | Compliance Status |
|---|---|
| ISO 9001:2015 | Quality management system - certified |
| CE | CE conformity, EN 61537 cable tray systems - declared |
| Parameter | Specification |
|---|---|
| Service Life | 25+ years |
| Load Capacity | Up to 180 kg/m |
| Support Span | Up to 6 m |
| Material | Q235 steel |
| Zinc Coating | 65-85 um |
| Width Range | 150-900 mm |
| Side Rail Height | 75-150 mm |
| Standard Length | 2 m / 3 m |
BENDIN manufactures heavy sections and galvanizes them in-house, so durability is built in rather than added later. We provide load, deflection and coating data for asset owners who plan on a 25-year horizon.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
