Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
Product Details
Weatherproof Galvanized Steel Cable Tray
,Galvanized Cable Trunking High Strength
,Weatherproof Galvanized Cable Trunking
Exposed structures need a tray that is both strong and weatherproof. BENDIN weatherproof galvanized cable trays use high-strength steel and a hot dipped zinc finish to carry heavy cable loads outdoors without sagging or rusting.
Reinforced side rails resist wind load and cable weight, while the galvanized surface handles rain, frost and UV without the chalking and cracking seen on painted trays.
The base drains water and the coating protects cut edges, so the tray performs through freeze-thaw cycles and summer heat.
We supply 2 m and 3 m lengths and can engineer support spacing for the project's wind and snow loads, with covers and fixings from the same range.
Typical applications include outdoor switchyards, industrial yards, bridges and rooftop plant, where the tray is fully exposed to the elements.
| Certificate Held | Compliance Status |
|---|---|
| ISO 9001:2015 | Quality management system - certified |
| CE | CE conformity, EN 61537 cable tray systems - declared |
| Parameter | Specification |
|---|---|
| Weatherproof | Rain, UV, temperature cycling |
| Steel | High-strength steel |
| Finish | Hot dip galvanized |
| Wind Load | Engineered outdoor spans |
| Width Range | 100-900 mm |
| Side Rail Height | 50-150 mm |
| Standard Length | 2 m / 3 m |
| Temperature Range | -40 to +150 C |
BENDIN's in-house fabrication and galvanizing let us match steel grade, coating and support spacing to the structural brief. Load and coating data are available so the design team can verify the system.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
