600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
Product Details
HDG Outdoor Cable Tray
,Outdoor Galvanized Steel Cable Tray
,Outdoor Galvanized Cable Trunking
Outdoor cable routes face rain, UV, frost and temperature swings that indoor trays never see. BENDIN outdoor galvanized cable trays use a hot dipped zinc coating that resists sunlight-driven breakdown and keeps the steel protected through years of open-air service.
The trough and perforated bases drain standing water instead of trapping it, reducing the wet periods that drive corrosion. Ventilated bases also let air move around cables, limiting condensation inside the tray.
We hot dip galvanize after fabrication so cut ends and drilled holes are coated, and we deburr edges to protect cable jackets during field installation.
Standard 2 m and 3 m lengths with bolted splice plates suit rooftop, car park and perimeter runs. Support spacing can be matched to the wind and snow loads of the project location.
Typical uses include rooftop PV cable routes, outdoor substations, car park lighting and factory yards. For coastal sites we can raise coating thickness or switch to stainless steel.
| Certificate Held | Compliance Status |
|---|---|
| ISO 9001:2015 | Quality management system - certified |
| CE | CE conformity, EN 61537 cable tray systems - declared |
| Parameter | Specification |
|---|---|
| Material | Q235 steel |
| Surface Finish | Hot dip galvanized |
| UV Resistance | Metallic coating, UV stable |
| Drainage | Perforated / trough base |
| Temperature Range | -40 to +150 C |
| Wind Load | Engineered support spans |
| Standard Length | 2 m / 3 m |
| Width Range | 100-600 mm |
BENDIN supplies complete outdoor systems - tray, covers, supports and fixings - from one factory, so specifiers deal with a single source. Our galvanizing line is in-house and every batch is thickness-tested, which keeps outdoor performance predictable.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
