Perforated Hot Dipped Galvanized Cable Tray 600mm Width NEMA VE1 IEC 61537 Listed
Product Details
Low Maintenance Galvanized Cable Tray
,IEC 61537 Listed Galvanized Cable Tray
,Galvanized Cable Tray 600mm Width
Perforated trays shed dust and water instead of collecting them. BENDIN low maintenance galvanized perforated cable trays use an open base pattern that lets debris fall through and air circulate, cutting the cleaning burden in dusty plants.
Because the base drains, standing water does not sit against the steel, which is a common cause of early corrosion in solid-bottom trays.
The tray is hot dip galvanized after perforating, so the hole edges are coated and do not become rust points. Deburred edges protect cable jackets.
Maintenance is normally limited to an occasional rinse or air blast; there is no painting cycle to schedule, which suits inaccessible ceiling voids and plant rooms.
Applications include data halls, workshops, food plants and warehouses where dust or lint builds up and access for cleaning is limited.
| Certificate Held | Compliance Status |
|---|---|
| IEC 61537 | Cable tray systems - compliant |
| BS EN 61537 | European cable tray systems - compliant |
| NEMA VE 1 / CSA | Compliant |
| Parameter | Specification |
|---|---|
| Base | Perforated, self-draining |
| Maintenance | Occasional rinse only |
| Material | Galvanized steel |
| Standard | IEC 61537 / BS EN 61537 / NEMA |
| Finish | Hot dip galvanized |
| Width Range | 100-600 mm |
| Standard Length | 2 m / 3 m |
| Load Class | Up to 100 kg/m |
BENDIN punches the perforation in-house, so the open area and pattern are consistent and the coating covers every hole. We supply the tray with covers and supports so the whole run is low maintenance, not just the tray.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
