80-100 um Zinc Coating Hot Dip Galvanised Cable Trunking 600mm Width High Load
Product Details
Zinc Coating Galvanised Cable Trunking
,Q235 Hot Dip Galvanised Cable Trunking
,High Load Galvanized Cable Trunking
Where abrasion and impact wear the surface, coating thickness decides service life. BENDIN thick coating galvanized cable trays carry 80-100 um of zinc, roughly double the minimum for standard hot dip, to resist mechanical damage and slow corrosion.
The heavier coating gives more sacrificial zinc to protect cut edges and scratches, extending maintenance-free life to around 20-25 years in typical industrial atmospheres.
We galvanize after fabrication and control immersion time and withdrawal speed to build the coating uniformly, then check it with a magnetic gauge across the batch.
Thicker zinc also stands up to the scuffing that occurs when trays are stacked, transported and dragged during installation.
It suits mining conveyors, steel plants, foundries and other dusty, abrasive environments where trays are handled roughly and cleaned infrequently.
| Certificate Held | Compliance Status |
|---|---|
| ISO 9001:2015 | Quality management system - certified |
| CE | CE conformity, EN 61537 cable tray systems - declared |
| Parameter | Specification |
|---|---|
| Zinc Coating | 80-100 um |
| Abrasion Resistance | High |
| Service Life | 20-25 years |
| Material | Q235 steel |
| Finish | Hot dip galvanized |
| Standard Length | 2 m / 3 m |
| Width Range | 100-600 mm |
| Load Class | Up to 120 kg/m |
BENDIN controls the galvanizing process in-house, so heavy coating is a production setting rather than a special purchase. We record coating thickness per batch and can supply the data with the delivery.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
