Salt Spray Resistant Galvanised Cable Tray 70-90um Zinc Custom Width For Coastal Sites
Product Details
Weather Resistant Galvanised Cable Tray
,Spray Resistant Galvanised Cable Tray
,Custom Width Galvanised Cable Tray
Coastal and marine sites punish cable trays with chloride-laden air and constant humidity. BENDIN salt spray resistant galvanized cable trays use a heavier hot dip coating, tested to 720 hours in salt spray, to keep the steel protected in these conditions.
The zinc layer is applied after fabrication so every cut edge and hole is covered, and coating thickness can be raised further for splash zones or offshore platforms.
Because every project has different routing, we make the tray to order: width, side rail height, length and perforation pattern can all be set to the drawing instead of forcing a catalogue size.
Custom lengths reduce site cutting and waste, and factory punching keeps holes aligned across the run. Trays ship with splice plates and covers sized to match.
Applications include port terminals, desalination plants, offshore modules and seaside substations, where repainting is impractical.
| Certificate Held | Compliance Status |
|---|---|
| ISO 9001:2015 | Quality management system - certified |
| CE | CE conformity, EN 61537 cable tray systems - declared |
| Parameter | Specification |
|---|---|
| Salt Spray Resistance | 720 h (ASTM B117) |
| Custom Length | Made to order |
| Zinc Coating | 70-90 um |
| Width | Custom 50-1000 mm |
| Side Rail Height | Custom |
| Material | Q235 steel |
| Application | Coastal / marine |
| Order Quantity | Project quantity |
BENDIN combines a hot dip galvanizing line with flexible fabrication, so custom sizes do not mean long lead times. Each batch is salt-spray and thickness tested, giving specifiers documented corrosion performance.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
