Ventilated Q235 Galvanized Steel Cable Tray High Load Corrosion Resistance
Product Details
High Load Galvanized Steel Cable Tray
,Corrosion Resistance Galvanized Steel Cable Tray
,High Load Galvanized Cable Trough
Power plants and heavy process lines need trays that carry dense cable bundles without sagging, yet still let heat escape. BENDIN high load ventilated galvanized cable trays combine reinforced side rails with an open perforated or trough base.
The ventilated base lets air circulate around cables, lowering conductor temperature and helping current-carrying capacity, while the open pattern drains water and debris.
Side rails are formed from heavier gauge steel and the base is stiffened, so the tray supports up to 200 kg/m over spans up to 6 m with controlled deflection.
Hot dip galvanizing after fabrication protects every cut and hole, and the coating resists the heat and contamination common in industrial plant rooms.
Typical applications include substations, generator halls, steel mills and large MCC rooms where cable density is high and ventilation matters.
| Certificate Held | Compliance Status |
|---|---|
| ISO 9001:2015 | Quality management system - certified |
| CE | CE conformity, EN 61537 cable tray systems - declared |
| Parameter | Specification |
|---|---|
| Load Capacity | Up to 200 kg/m |
| Support Span | Up to 6 m |
| Ventilation | Perforated / open trough base |
| Material | Q235 steel |
| Finish | Hot dip galvanized |
| Width Range | 150-900 mm |
| Side Rail Height | 75-150 mm |
| Operating Temperature | -40 to +120 C |
BENDIN engineers the load rating around the customer's span and cable weight, then manufactures tray and supports in one plant. We can supply load and deflection data so the structural engineer can sign off with confidence.
Up to 200 kg/m over spans up to 6 m, with controlled deflection.
Open bases let air circulate, lowering conductor temperature and draining water.
Substations, generator halls, steel mills and large MCC rooms.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
