Pre Punched Splice Plate Galvanized Steel Cable Tray 600mm Width Fast Site Assembly
Product Details
Hot Dipped Galvanized Steel Cable Tray
,Easy Installation Galvanized Cable Trunking
Site labour is often the largest cost on a cable tray project. BENDIN easy-installation galvanized cable trays arrive with pre-punched splice plates and matched couplers, so two fitters can join sections with hand tools and no hot work.
Because holes are punched at the factory on a jig, sections line up without field drilling. Bolted connections also allow later modification or re-routing without cutting or welding.
We hot dip galvanize after punching, so the pre-drilled holes are fully coated and do not become rust starting points. Edges are deburred so cables slide in without damage.
Standard 2 m and 3 m lengths keep manual handling practical, and bends, tees, reducers and covers come from the same range so the run assembles without improvisation.
Contractors report up to 40% faster installation compared with welded or field-drilled systems, and the bolted joints can be inspected quickly.
| Certificate Held | Compliance Status |
|---|---|
| CE | CE conformity, EN 61537 cable tray systems - declared |
| ISO 9001:2015 | Quality management system - certified |
| Parameter | Specification |
|---|---|
| Connection | Pre-punched plates, bolted |
| Tools Required | Hand tools, no welding |
| Installation Speed | Up to 40% faster |
| Accessories | Couplers, bends, covers |
| Standard Length | 2 m / 3 m |
| Width Range | 100-600 mm |
| Finish | Hot dip galvanized |
| Load Class | Up to 90 kg/m |
BENDIN ships tray, splice plates and fixings together, packed by run, so nothing is missing on site. Our factory punching keeps hole positions consistent across batches, which is what makes fast assembly reliable.
No. Pre-punched splice plates and bolted couplers assemble with hand tools.
Contractors report up to 40% faster installation than welded or field-drilled systems.
Yes. Bolted joints allow re-routing without cutting or welding.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
