Impact Resistant Aluminium Cable Tray Rust Proof 1.5mm-2.0mm for Mining Dock Duty
Product Details
Impact Resistant Aluminium Cable Tray
,Rust Proof Aluminium Cable Tray
,Impact Resistant Aluminium Trough
In a busy plant, tray gets hit. Tools are dropped, forkllifts brush past and pallets fall, and a thin tray will dent or crack. The BENDIN Impact Resistant Aluminium Cable Tray Rust Proof uses thick wall 6061-T6 extrusions and reinforced rungs to absorb that abuse while keeping the cables protected.
Rust proof is not a coating claim here, it is the material. Aluminium does not rust, so even where the surface is scratched the tray will not develop the red corrosion that destroys steel. An optional anodized or powder coated skin adds abrasion and chemical resistance on top of that inherent protection.
Resistance to impact also reduces damage in transit. Fewer bent sections arrive on site, fewer are scrapped, and the finished route looks neat instead of patched together. That matters on projects where appearance and inspection standards are strict.
BENDIN selects impact resistant alloy grades and verifies wall thickness and mechanical properties in house. Consistent strength from the first section to the last is what makes the impact rating meaningful rather than nominal.
Use this tray in mining, heavy industry, loading docks, workshops and outdoor yards. A full range of heavy duty brackets and couplers is available so the support system is as tough as the tray.
| Certificate Held | Compliance Status |
|---|---|
| IEC 61537 | Cable tray systems - compliant |
| BS EN 61537 | European cable tray systems - compliant |
| NEMA/CSA | NEMA VE 1 / CSA - compliant |
| Parameter | Specification |
|---|---|
| Alloy | 6061-T6 impact resistant aluminium |
| Impact resistance | 20 J single point, reinforced rungs |
| Corrosion class | C4 suitable with coating |
| Salt spray life | Up to 720 h (coated) |
| Wall thickness | 1.5 / 2.0 / 2.5 mm |
| Width range | 100 - 800 mm |
| Working load | Up to 150 kg/m |
| Finish | Mill / anodized / powder coated |
BENDIN manufactures rugged aluminium cable tray with controlled alloy and thickness. We help customers match impact and corrosion protection to the real site conditions, with OEM and ODM service and reliable lead times.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
