Modular Aluminum Cable Trunking Weather Resistant for Roof Car Park Installation
Product Details
Modular Aluminium Cable Tray
,Weather Resistant Aluminium Cable Tray
,Modular Aluminium Cable Trunking
Outdoor cable routes face sun, rain, frost and wind, often with no maintenance access for years. The BENDIN Modular Aluminium Cable Tray Weather Resistant is built as a system of standard modules and couplers that assembles fast and then stands up to the weather.
The aluminium body will not rust, and the UV stable powder coating resists fading, chalking and corrosion. On rooftops, car parks, solar farms and exposed industrial sites, the tray keeps both its strength and its appearance far longer than a bare or poorly coated product.
Modularity is what makes the system practical. Standard 2, 3 and 6 meter sections join through couplers into a straight, rigid run, and expansion joints are available to absorb thermal movement over long outdoor spans. Extensions later use the same compatible parts.
BENDIN tests coating adhesion and weather performance and controls extrusion tolerance in house, so modules line up cleanly and couplers lock without force. Consistent modules are what make a modular system actually faster to install.
This range suits rooftop plant, car park lighting, solar and wind farms and exposed utility routes. Spare parts remain available for years, which protects the value of the original installation.
| Certificate Held | Compliance Status |
|---|---|
| ISO 9001:2015 | Quality management system - certified |
| CE | CE conformity, EN 61537 cable tray systems - declared |
| Parameter | Specification |
|---|---|
| Module length | 2000 / 3000 / 6000 mm |
| UV resistance | UV stable powder coating, 1000 h test |
| Service temperature | -40 to +80 degrees C |
| Protection with cover | Up to IP54 |
| Coating thickness | 80 - 120 um |
| Expansion joint | Available for long runs |
| Wall thickness | 1.2 / 1.5 / 2.0 mm |
| Finish | Polyester powder coat, weather resistant |
BENDIN produces modular cable tray with consistent dimensions and durable outdoor finishes. Our OEM and ODM teams support project specific modules, and our supply chain keeps lead times short for large outdoor projects.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
