Non Magnetic Aluminum Alloy Cable Tray 6063 T5 for MRI Room Installation
Product Details
Non Magnetic Aluminium Cable Tray
,Customizable Aluminium Cable Tray
,Customizable Aluminium Raceway
Near an MRI scanner or a sensitive instrument, steel tray is a liability because it distorts magnetic fields. The BENDIN Customizable Aluminium Cable Tray Anti Magnetic is made from non magnetic aluminium with relative permeability close to air, so it routes cables without influencing the equipment around it.
Customization is the second half of the value. Because every hospital and lab layout is different, BENDIN produces non standard widths, special slot patterns, drilled fixing holes, custom bend radii and matched colors from your drawings, so the tray fits the room rather than the room being adapted to the tray.
Drawing based production reduces on site cutting and the metal debris that cutting creates. In clean rooms and imaging suites, fewer particles and less improvisation mean a safer, tidier installation that passes validation more easily.
BENDIN reviews every custom request for dimensions, tolerances and finish before production and can supply prototypes or samples quickly. Engineering feedback comes from the same team that runs the tooling, so design intent and manufacturability stay aligned.
Use this range in MRI and radiology rooms, laboratories, electronics plants and research facilities. From a single special bend to a complete bespoke system, the anti magnetic property is preserved on every custom part.
| Certificate Held | Compliance Status |
|---|---|
| ISO 9001:2015 | Quality management system - certified |
| CE | CE conformity, EN 61537 cable tray systems - declared |
| Parameter | Specification |
|---|---|
| Magnetic behaviour | Non magnetic, relative permeability about 1.00002 |
| Custom width | 50 - 1000 mm |
| Custom length | Made to drawing |
| Slot pattern | Custom punching per drawing |
| Bend radius | Custom per layout |
| Dimensional tolerance | Plus or minus 1 mm typical |
| Finish | Anodized or powder coat, custom RAL |
| Sample lead time | 3 - 7 days |
BENDIN is a customization focused aluminium cable tray maker with in house tooling. We convert drawings into production ready tray, support OEM and ODM programs, and keep magnetic neutrality on custom parts as rigorously as on standard ones.
Yes. Aluminium has a relative permeability near 1, so it does not disturb magnetic fields.
Width, length, slot pattern, bend radius, fixing holes and color, all made to your drawings.
Prototypes and samples are typically ready within 3 to 7 days.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
