Thermal Management Aluminium Cable Tray Perforated 6063 T5 Sheet for Solar Farm Routes
Product Details
Thermal Management Aluminium Cable Tray
,6063 T5 Aluminium Cable Tray
,Thermal Aluminium Cable Trunking
Not every project can afford active cooling, but every project needs cables that do not overheat. The BENDIN Cost Effective Aluminium Cable Tray Thermal Management uses aluminium, with a thermal conductivity near 200 W per meter kelvin, plus an open section to draw heat out of the cable bundle at a price that suits volume projects.
The thermal advantage has a commercial value. Lower conductor temperature can allow a higher current rating for the same cable size, or a smaller cable for the same load, and that saving often pays for the tray many times over across a large installation.
Low cost does not come from cutting the section. BENDIN keeps wall thickness and finish quality intact by using efficient extrusion and automated punching, and by shipping standard lengths that reduce cutting and waste. A compact accessory range keeps the bill of materials lean.
Because production is in house, there is no middle man markup and lead times are short. That combination is what makes this range genuinely cost effective rather than simply cheap.
Typical uses include solar farms, energy storage rooms, server racks and general power distribution. Perforated covers can be added to fine tune airflow and protection when the layout demands it.
| Certificate Held | Compliance Status |
|---|---|
| ISO 9001:2015 | Quality management system - certified |
| CE | CE conformity - declared |
| RoHS 2011/65/EU | Hazardous substance restriction - compliant |
| NEMA | NEMA VE 1 - compliant |
| Parameter | Specification |
|---|---|
| Thermal conductivity | Approx. 200 W/mK |
| Open area | Up to 40 percent |
| Indicative ampacity gain | Up to 8 percent vs enclosed tray |
| Alloy | 6063-T5 aluminium |
| Wall thickness | 1.2 / 1.5 mm |
| Width range | 100 - 600 mm |
| Section length | 2000 / 3000 mm |
| Finish | Mill / anodized / powder coated |
BENDIN offers factory direct pricing built on in house extrusion and finishing. We help customers right size tray width and thickness for the lowest total cost while still meeting thermal and load requirements, with OEM and ODM support available.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
