4mm-6mm Stainless Steel Wire Basket Cable Tray for Corrosive Duty ISO CE CQC

Stainless Steel Mesh Cable Tray Corrosion Resistant

1. Core Functional Advantages

BENDIN Stainless Steel Mesh Cable Tray is engineered for corrosion resistance. Made from 304 or 316/316L stainless steel, it resists rust, chemicals, and salt spray without a coating, so protection never depends on a layer that can be damaged. The open mesh ventilates cables and prevents moisture and debris from collecting, the welded lattice carries cable loads while resisting deformation, and the smooth stainless finish suits food, pharmaceutical, and clean-area installations.

2. Application Scenarios and Certification Requirements

Stainless mesh trays are specified for coastal and marine, chemical and pharmaceutical, food and beverage, and water and wastewater applications. Certification follows the market — IEC/EN/BS/NF/DIN 61537 and CE/RoHS for Europe, NEMA VE1/VE2 with NEC 392 and UL for North America, and CCC, BIS, SASO/SABER, or JIS where required. BENDIN supplies MTC or CoC documents so the stainless grade can be traced and verified.

3. Specification Types and Suitability

BENDIN stainless mesh trays are offered in heights of 25–150 mm, widths of 50–600 mm, and standard 3 m sections, with wire diameters of 3.5–6 mm and mesh openings typically 50 mm × 100 mm. Grade 304 suits general industrial and indoor use; 316/316L is recommended for coastal, chemical, or chloride-rich environments. Finishes include pickled and passivated or electropolished.

4. Installation Considerations

Install BENDIN stainless trays with bolted couplers and supports at 1.5–2.0 m, tightening at bends and heavy loads. Use stainless fixings to avoid galvanic corrosion and deburr cut ends. Because stainless trays may not provide electrical continuity through every joint, use dedicated grounding jumpers where bonding is required. In hygienic areas, keep the mesh clear and clean to preserve the corrosion-resistant performance.