150mm-600mm Width Heavy Duty Mesh Wire Cable Tray Corrosion Resistant Steel
Product Details
150mm Mesh Cable Tray
,UL Rated Mesh Cable Tray
,Heavy Duty Cable Basket Tray
Heavy Duty Mesh Cable Tray for Corrosion Resistance
1. Core Functional Advantages
BENDIN Heavy Duty Mesh Cable Tray is engineered for the severest duty. Heavier wire, deeper sections, and a corrosion-resistant finish let the tray carry large cable loads over long spans while surviving moisture, chemicals, and industrial atmospheres. The welded lattice resists twisting and fatigue under heavy or vibrating loads, and the corrosion-resistant finish delivers proven long life with less downtime, so the tray keeps working where lighter systems would fail.
2. Application Scenarios and Certification Requirements
This tray is specified for heavy industrial power, chemical and refining, outdoor and coastal yards, and water treatment plants, where loads are heavy and environments are aggressive. Certification follows the market — IEC/EN/BS/NF/DIN 61537 and CE/RoHS for Europe, NEMA VE1/VE2 with NEC 392 and UL for North America, and CCC, BIS, SASO/SABER, or JIS where required. BENDIN supplies load/deflection curves and material certificates.
3. Specification Types and Suitability
BENDIN heavy duty trays are available in heights of 50–150 mm and widths of 50–600 mm, with heavier wire diameters up to 6 mm, in standard 3 m sections. Hot-dip galvanized steel suits general heavy industrial use, while stainless steel is recommended for chemical or coastal conditions. Load capacity depends on wire diameter, depth, and support spacing.
4. Installation Considerations
Install BENDIN heavy trays on firm structure with supports at 1.5–2.0 m and closer for heavy loads, with supports within 0.6 m of every fitting. Verify deflection against the load/deflection curves for the actual span. Use appropriate fasteners and, in corrosive areas, stainless fixings, and repair any damaged coating before loading to preserve corrosion protection.
Certification Requirements for Heavy Duty Mesh Cable Tray for Corrosion Resistance
| Region / Country | Primary Standard(s) | Additional Requirements | Certification Mark |
|---|---|---|---|
| International | IEC 61537 | Load testing and electrical continuity; RoHS; REACH | Third-party test reports |
| North America (USA) | NEMA VE1, NEC Article 392 | NEMA VE2 installation guidance; UL; ANSI/TIA-569 | UL / ETL Listed |
| North America (Canada) | CSA C22.2; ULC | c-UL-us listing; provincial electrical code | c-UL-us Listed |
| European Union | EN 61537 / IEC 61537 | CE marking; RoHS; LVD 2014/35/EU | CE marking |
| United Kingdom | BS EN 61537 | UKCA; BS 476 fire tests | UKCA / CE |
| Germany | DIN EN 61537 | DIN 4102 fire tests (E30–E90) | DIN / CE |
| France | NF EN 61537 | NF fire classification; CE | NF / CE |
| Australia / New Zealand | AS/NZS 61537 | AS/NZS 3000 Wiring Rules; RCM | RCM compliance |
| China | GB/T standards | CCC certification; GB 8624 fire classification | CCC mark |
| India | IS/IEC 61537 | BIS licence; TEC approval (telecom) | BIS / TEC |
| Japan | JIS standards | VCCI; TELEC approval for telecom equipment | JIS / TELEC |
| Middle East (Saudi Arabia) | SASO IEC 61537 | SABER conformity; ASTM E84 Class 1 | SASO / SABER |
| Middle East (UAE) | IEC 61537 | ADNOC specifications; DEWA submittal requirements | ADNOC / DEWA approval |
Common Specifications of Heavy Duty Mesh Cable Tray for Corrosion Resistance
| Specification Parameter | Standard Range / Options | Notes |
|---|---|---|
| Product Name | Heavy Duty Mesh Cable Tray for Corrosion Resistance | BENDIN wire mesh cable tray |
| Material | Stainless steel, | Grade selected to suit the operating environment |
| Standard Width | 150-600mm | Other widths available to order |
| Standard Height (Depth) | 25–150 mm | Depth chosen for load and cable volume |
| Wire Diameter | 3.5–6 mm | Heavier wire for higher load capacity |
| Standard Length | 3 m per section | Custom lengths available |
| Mesh Size | 50 mm × 100 mm (typical) | Adjustable for airflow and visibility |
| Finish / Color | Silver / natural metal or customized | Powder coating and colour options available |
| Installation Method | Bolted couplers; field cut and bend on site | Tool-free joint variants available |
| Load Capacity | Reference BENDIN load/deflection curves | Confirm against span and support spacing |
| Support Spacing | 1.5–2.0 m (typical) | Closer at bends and heavy loads |
| Brand | BDINDUSTRIAL | BENDIN |
| Model Number | Stainless Steel Wire Basket Tray | |
| Certification | UL, IEC 61537, ASTM A276 | Test reports available on request |
| Place of Origin | Hebei | |
| Minimum Order Quantity | 250m | |
| Price | 8-50USD | FOB / negotiable by quantity |
| Delivery Time | 8-26days | |
| Payment Terms | L/C,D/A,D/P,Western Union | |
| Supply Ability | 200000m/month | |
| Packaging Details | In pallet/ bulk | |
| Service Life | 20+ years | With correct installation and cable loading |
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
