High Strength Wire Mesh Cable Tray Steel Construction High Load Easy Installation
Product Details
High Strength Wire Mesh Cable Tray
,Steel Construction Wire Cable Tray
,High Load Wire Mesh Cable Tray
Good Ventilation Wire Cable Trays with High Strength Steel Wire Construction
1. Core Functional Advantages
BENDIN Wire Cable Tray delivers good ventilation together with high-strength steel wire construction. Stronger wire and a welded lattice give the tray the rigidity to carry heavy bundles without deformation, while the open grid ventilates every cable to control heat and extend service life. Strength and airflow are optimised together, so the tray resists sagging even with dense fills and still keeps conductors cool — an important balance in power and data installations alike.
2. Application Scenarios and Certification Requirements
Ventilated high-strength trays are chosen for industrial power and control, data center backbones, cable galleries, and plant process areas where heavy bundles also need heat dissipation. Certification follows the market — IEC/EN/BS/NF/DIN 61537 and CE/RoHS for Europe, NEMA VE1/VE2 with NEC 392 and UL for North America, and CCC, BIS, SASO/SABER, or JIS where required. BENDIN supplies load/deflection curves and test reports to confirm both strength and compliance.
3. Specification Types and Suitability
BENDIN ventilated high-strength trays come in heights of 50–150 mm, widths of 50–600 mm, and standard 3 m sections, with wire diameters of 3.5–6 mm. Wire diameter is increased where higher loads must be carried, while mesh opening (typically 50 mm * 100 mm) is kept large enough for effective ventilation. Stainless and galvanized materials are available.
4. Installation Considerations
Install BENDIN trays with supports at 1.5–2.0 m and closer for heavy loads, keeping supports within 0.6 m of fittings. Join sections with bolted couplers and verify deflection against the load/deflection curves. To preserve ventilation, avoid over-filling, keep the mesh clear, and space cable ties so airflow through the bundle is not restricted. Bond and separate power and data as required.
Certification Requirements for Good Ventilation Wire Cable Trays with High Strength Steel Wire Construction
| Region / Country | Primary Standard(s) | Additional Requirements | Certification Mark |
|---|---|---|---|
| International | IEC 61537 | Load testing and electrical continuity; RoHS; REACH | Third-party test reports |
| North America (USA) | NEMA VE1, NEC Article 392 | NEMA VE2 installation guidance; UL; ANSI/TIA-569 | UL / ETL Listed |
| North America (Canada) | CSA C22.2; ULC | c-UL-us listing; provincial electrical code | c-UL-us Listed |
| European Union | EN 61537 / IEC 61537 | CE marking; RoHS; LVD 2014/35/EU | CE marking |
| United Kingdom | BS EN 61537 | UKCA; BS 476 fire tests | UKCA / CE |
| Germany | DIN EN 61537 | DIN 4102 fire tests (E30–E90) | DIN / CE |
| France | NF EN 61537 | NF fire classification; CE | NF / CE |
| Australia / New Zealand | AS/NZS 61537 | AS/NZS 3000 Wiring Rules; RCM | RCM compliance |
| China | GB/T standards | CCC certification; GB 8624 fire classification | CCC mark |
| India | IS/IEC 61537 | BIS licence; TEC approval (telecom) | BIS / TEC |
| Japan | JIS standards | VCCI; TELEC approval for telecom equipment | JIS / TELEC |
| Middle East (Saudi Arabia) | SASO IEC 61537 | SABER conformity; ASTM E84 Class 1 | SASO / SABER |
| Middle East (UAE) | IEC 61537 | ADNOC specifications; DEWA submittal requirements | ADNOC / DEWA approval |
Common Specifications of Good Ventilation Wire Cable Trays with High Strength Steel Wire Construction
| Specification Parameter | Standard Range / Options | Notes |
|---|---|---|
| Product Name | Good Ventilation Wire Cable Trays with High Strength Steel Wire Construction | BENDIN wire mesh cable tray |
| Material | Galvanized steel; 304 / 316L stainless steel | Grade selected to suit the operating environment |
| Standard Width | 50–600 mm | Other widths available to order |
| Standard Height (Depth) | 25–150 mm | Depth chosen for load and cable volume |
| Wire Diameter | 3.5–6 mm | Heavier wire for higher load capacity |
| Standard Length | 3 m per section | Custom lengths available |
| Mesh Size | 50 mm * 100 mm (typical) | Adjustable for airflow and visibility |
| Finish / Color | Silver / natural metal or customized | Powder coating and colour options available |
| Installation Method | Bolted couplers; field cut and bend on site | Tool-free joint variants available |
| Load Capacity | Reference BENDIN load/deflection curves | Confirm against span and support spacing |
| Support Spacing | 1.5–2.0 m (typical) | Closer at bends and heavy loads |
| Brand | BDINDUSTRIAL | BENDIN |
| Model Number | stainless steel wire mesh cable tray | |
| Certification | IEC 61537,BS EN 61537,NEMA/CSA | Test reports available on request |
| Place of Origin | CHINA | |
| Service Life | 20+ years | With correct installation and cable loading |
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
