Ventilated Steel Wire Cable Tray 3m 10ft Length For Power Cable Routing

Easy Installation Wire Cable Trays with Good Ventilation for Power Cable Routing

1. Core Functional Advantages

BENDIN Easy-Installation Wire Cable Tray with good ventilation is designed for power cable routing. The open mesh lets heat escape around every cable, helping maintain rated capacity and insulation life, while lightweight sections and simple joints mean heavy power runs are installed quickly and with fewer supports. The structure is stiff enough to carry large power conductors over the required spans, and the open design lets power cables and joints be inspected easily for heat or damage.

2. Application Scenarios and Certification Requirements

This tray is specified for main power distribution, motor and MCC feeds, industrial power runs, and commercial distribution, where power cables generate significant heat. Certification follows the market — IEC/EN/BS/NF/DIN 61537 and CE/RoHS for Europe, NEMA VE1/VE2 with NEC 392 and UL for North America, and CCC, BIS, SASO/SABER, or JIS where required. BENDIN supplies test reports and load/deflection curves to confirm span capacity.

3. Specification Types and Suitability

BENDIN ventilated power-routing trays come in heights of 25–150 mm, widths of 50–600 mm, and standard 3 m sections, with wire diameters of 3.5–6 mm and mesh openings typically 50 mm * 100 mm. For higher-current runs, larger mesh openings and deeper sections improve airflow and heat dissipation. Stainless and galvanized options suit different environments.

4. Installation Considerations

Install BENDIN power trays with good airflow and fill headroom. Join sections with bolted couplers and support at 1.5–2.0 m, tightening at heavy loads and bends. Do not over-fill the tray, keep the mesh clear, and use dividers or separate trays to keep power away from data cables. Bond the tray to the grounding system, and verify deflection against the load curves before loading.