Hot Dip Galvanized Finish Steel Wire Mesh Cable Tray Heavy Duty For Industrial Routing
Product Details
Heavy Duty Galvanized Wire Cable Tray
,Hot Dip Galvanized Cable Tray
,Galvanized Finish Wire Mesh Cable Tray
Heavy Duty Wire Cable Trays with Corrosion Resistant Hot Dip Galvanized Finish
1. Core Functional Advantages
BENDIN Heavy Duty Wire Cable Tray with a corrosion-resistant hot-dip galvanized finish is built for demanding outdoor and industrial use. The thick, metallurgically bonded zinc coating protects the steel inside and out, including at cut edges, while heavy wire and deep side rails carry substantial loads over long spans. The open mesh ventilates cables and sheds water, and the tough coating resists mechanical damage, giving durable, low-maintenance performance at a sensible cost.
2. Application Scenarios and Certification Requirements
Heavy duty hot-dip galvanized trays suit outdoor industrial routing, power generation and utility, petrochemical areas, and large commercial projects. Certification is matched to the market: IEC/EN/BS/NF/DIN 61537 and CE/RoHS for Europe, NEMA VE1/VE2 with NEC 392 and UL for North America, and CCC, BIS, SASO/SABER, or JIS where required. BENDIN can specify coating weight and supply load/deflection curves and test reports.
3. Specification Types and Suitability
BENDIN heavy duty galvanized trays come in heights of 50–150 mm, widths of 50–600 mm, and standard 3 m sections, with heavier wire diameters up to 6 mm. Zinc coating weight is chosen for the exposure; where chlorides or chemicals are severe, stainless steel is recommended instead. Load capacity is governed by wire diameter, depth, and support spacing.
4. Installation Considerations
Install BENDIN heavy galvanized trays on firm structure with supports at 1.5–2.0 m, tightened at bends and heavy loads. Repair cut or damaged zinc with cold galvanizing compound, and use galvanized or stainless fixings to avoid dissimilar-metal corrosion. On long outdoor runs include expansion fittings and verify load/deflection against the actual span before final tightening.
Certification Requirements for Heavy Duty Wire Cable Trays with Corrosion Resistant Hot Dip Galvanized Finish
| Region / Country | Primary Standard(s) | Additional Requirements | Certification Mark |
|---|---|---|---|
| International | IEC 61537 | Load testing and electrical continuity; RoHS; REACH | Third-party test reports |
| North America (USA) | NEMA VE1, NEC Article 392 | NEMA VE2 installation guidance; UL; ANSI/TIA-569 | UL / ETL Listed |
| North America (Canada) | CSA C22.2; ULC | c-UL-us listing; provincial electrical code | c-UL-us Listed |
| European Union | EN 61537 / IEC 61537 | CE marking; RoHS; LVD 2014/35/EU | CE marking |
| United Kingdom | BS EN 61537 | UKCA; BS 476 fire tests | UKCA / CE |
| Germany | DIN EN 61537 | DIN 4102 fire tests (E30–E90) | DIN / CE |
| France | NF EN 61537 | NF fire classification; CE | NF / CE |
| Australia / New Zealand | AS/NZS 61537 | AS/NZS 3000 Wiring Rules; RCM | RCM compliance |
| China | GB/T standards | CCC certification; GB 8624 fire classification | CCC mark |
| India | IS/IEC 61537 | BIS licence; TEC approval (telecom) | BIS / TEC |
| Japan | JIS standards | VCCI; TELEC approval for telecom equipment | JIS / TELEC |
| Middle East (Saudi Arabia) | SASO IEC 61537 | SABER conformity; ASTM E84 Class 1 | SASO / SABER |
| Middle East (UAE) | IEC 61537 | ADNOC specifications; DEWA submittal requirements | ADNOC / DEWA approval |
Common Specifications of Heavy Duty Wire Cable Trays with Corrosion Resistant Hot Dip Galvanized Finish
| Specification Parameter | Standard Range / Options | Notes |
|---|---|---|
| Product Name | Heavy Duty Wire Cable Trays with Corrosion Resistant Hot Dip Galvanized Finish | BENDIN wire mesh cable tray |
| Material | Steel | Grade selected to suit the operating environment |
| Standard Width | 50-600 mm/2-24 in | Other widths available to order |
| Standard Height (Depth) | 25–150 mm | Depth chosen for load and cable volume |
| Wire Diameter | 3.5-6 mm | Heavier wire for higher load capacity |
| Standard Length | 3 m/10 ft | Custom lengths available |
| Mesh Size | 50 mm × 100 mm (typical) | Adjustable for airflow and visibility |
| Finish / Color | Silver / natural metal or customized | Powder coating and colour options available |
| Installation Method | Bolted couplers; field cut and bend on site | Tool-free joint variants available |
| Load Capacity | Reference BENDIN load/deflection curves | Confirm against span and support spacing |
| Support Spacing | 1.5–2.0 m (typical) | Closer at bends and heavy loads |
| Brand | BDINDUSTRIAL | BENDIN |
| Model Number | gi wire mesh cable tray | |
| Certification | IEC 61537,BS EN 61537,NEMA/CSA | Test reports available on request |
| Place of Origin | CHINA | |
| Minimum Order Quantity | 100 m | |
| Price | 20-30 USD | FOB / negotiable by quantity |
| Delivery Time | 15-25 work days | |
| Payment Terms | L/C,D/P,T/T | |
| Supply Ability | 50000 m/week | |
| Packaging Details | Carton, Box, Wooden carton | |
| Service Life | 20+ years | With correct installation and cable loading |
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
