3.5mm Stainless Steel Wire Mesh Cable Tray 50mm-600mm Width Custom Length
Product Details
Custom Length Wire Mesh Cable Tray
,3.5mm Wire Mesh Cable Tray
,IEC 61537 Wire Basket Tray
Stainless Steel Wire Mesh Cable Tray Custom Length
1. Core Functional Advantages
BENDIN Stainless Steel Wire Mesh Cable Tray can be produced in custom lengths to suit the drawing. Trays arrive sized for the job, so installers spend less time cutting, joining, and making good on site. Custom lengths mean fewer couplers and joints, which speeds installation, improves the appearance of long runs, and reduces off-cuts and waste. Factory-cut lengths are dimensionally accurate and keep the welded mesh intact along the whole section.
2. Application Scenarios and Certification Requirements
Custom-length trays are chosen for modular building grids, long continuous backbones, plant maintenance spans, and data center row runs where standard lengths do not fit cleanly. Certification is matched to the market — IEC/EN/BS/NF/DIN 61537 and CE/RoHS for Europe, NEMA VE1/VE2 with NEC 392 and UL for North America, and CCC, BIS, SASO/SABER, or JIS where required. BENDIN supplies test reports for the supplied lengths so the run can be verified.
3. Specification Types and Suitability
BENDIN custom-length trays are manufactured in heights of 25–150 mm and widths of 50–600 mm, with wire diameters of 3.5–6 mm. Lengths are produced to order alongside standard 3 m sections, so a single project can mix standard and bespoke lengths. Materials include stainless steel and galvanized steel, with end treatment to suit the jointing detail.
4. Installation Considerations
Because lengths arrive pre-sized, installation focuses on jointing and support rather than cutting. Join custom sections with BENDIN couplers; a single full-length section needs no mid-run joint at all. Provide the exact span, end treatment, and quantity when ordering, and place supports at 1.5–2.0 m intervals, reduced at fittings. Deburr any field cuts and confirm lengths before fixing to avoid rework.
Certification Requirements for Stainless Steel Wire Mesh Cable Tray Custom Length
| Region / Country | Primary Standard(s) | Additional Requirements | Certification Mark |
|---|---|---|---|
| International | IEC 61537 | Load testing and electrical continuity; RoHS; REACH | Third-party test reports |
| North America (USA) | NEMA VE1, NEC Article 392 | NEMA VE2 installation guidance; UL; ANSI/TIA-569 | UL / ETL Listed |
| North America (Canada) | CSA C22.2; ULC | c-UL-us listing; provincial electrical code | c-UL-us Listed |
| European Union | EN 61537 / IEC 61537 | CE marking; RoHS; LVD 2014/35/EU | CE marking |
| United Kingdom | BS EN 61537 | UKCA; BS 476 fire tests | UKCA / CE |
| Germany | DIN EN 61537 | DIN 4102 fire tests (E30–E90) | DIN / CE |
| France | NF EN 61537 | NF fire classification; CE | NF / CE |
| Australia / New Zealand | AS/NZS 61537 | AS/NZS 3000 Wiring Rules; RCM | RCM compliance |
| China | GB/T standards | CCC certification; GB 8624 fire classification | CCC mark |
| India | IS/IEC 61537 | BIS licence; TEC approval (telecom) | BIS / TEC |
| Japan | JIS standards | VCCI; TELEC approval for telecom equipment | JIS / TELEC |
| Middle East (Saudi Arabia) | SASO IEC 61537 | SABER conformity; ASTM E84 Class 1 | SASO / SABER |
| Middle East (UAE) | IEC 61537 | ADNOC specifications; DEWA submittal requirements | ADNOC / DEWA approval |
Common Specifications of Stainless Steel Wire Mesh Cable Tray Custom Length
| Specification Parameter | Standard Range / Options | Notes |
|---|---|---|
| Product Name | Stainless Steel Wire Mesh Cable Tray Custom Length | BENDIN wire mesh cable tray |
| Material | Stainless Steel | Grade selected to suit the operating environment |
| Standard Width | 50-600 mm/2-24 in | Other widths available to order |
| Standard Height (Depth) | 25–150 mm | Depth chosen for load and cable volume |
| Wire Diameter | 3.5-6 mm | Heavier wire for higher load capacity |
| Standard Length | 3 m/10 ft | Custom lengths available |
| Mesh Size | 50 mm × 100 mm (typical) | Adjustable for airflow and visibility |
| Finish / Color | Silver / natural metal or customized | Powder coating and colour options available |
| Installation Method | Bolted couplers; field cut and bend on site | Tool-free joint variants available |
| Load Capacity | Reference BENDIN load/deflection curves | Confirm against span and support spacing |
| Support Spacing | 1.5–2.0 m (typical) | Closer at bends and heavy loads |
| Brand | BDINDUSTRIAL | BENDIN |
| Model Number | Stainless Steel Wire Cable Tray | |
| Certification | IEC 61537,BS EN 61537,NEMA/CSA | Test reports available on request |
| Place of Origin | CHINA | |
| Minimum Order Quantity | 100 m | |
| Price | 20-30 USD | FOB / negotiable by quantity |
| Delivery Time | 15-25 work days | |
| Payment Terms | L/C,D/P,T/T | |
| Supply Ability | 50000 m/week | |
| Packaging Details | Carton, Box, Wooden carton | |
| Service Life | 20+ years | With correct installation and cable loading |
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
