Fire Resistant Stainless Steel Wire Mesh Cable Tray 50mm-600mm Width for Tunnel Installation
Product Details
Fire Resistant Wire Mesh Cable Tray
,316SS Wire Mesh Cable Tray
,Silver Wire Basket Tray
Stainless Steel Wire Mesh Cable Tray Fire Resistant
1. Core Functional Advantages
BENDIN Stainless Steel Wire Mesh Cable Tray is well suited to fire-resistant installations. Made entirely of stainless steel, the tray adds no fuel load and does not contribute to flame spread. Its open mesh lets heat and smoke dissipate upward rather than being contained around the cables, reducing fire severity. As part of a tested fire-rated support system, the tray can help maintain E30–E90 circuit integrity for critical circuits, and its open structure resists the build-up of dust and debris that could otherwise ignite.
2. Application Scenarios and Certification Requirements
Fire-resistant trays are specified for emergency and life-safety circuits, escape-route cabling, industrial fire zones, and fire-rated data center trunks. Because fire performance is regulated, certification is decisive: IEC 61537 and DIN 4102-12 (E30–E90) or EN 61537 in Europe, NEMA VE1/VE2 with NEC 392 and UL in North America, and CE for the EU, with local fire classifications (such as GB 8624) elsewhere. BENDIN supplies the matching accessories so the whole system can be verified as a complete assembly.
3. Specification Types and Suitability
BENDIN fire-resistant trays are offered in heights of 25–150 mm, widths of 50–600 mm, and standard 3 m sections, made from non-combustible stainless steel. Fire-rated installations require the tray, supports, fasteners, and connectors to be tested together as a system. Mesh size is typically 50 mm * 100 mm, with grade selected for the environment (304 for general use, 316/316L for corrosive areas).
4. Installation Considerations
Installation uses BENDIN bolted couplers and standard supports, but for fire-rated routes only tested system components may be used — do not mix brands or substitute generic supports, fasteners, or connectors. Support spacing follows the tested system, typically 1.5–2.0 m, with supports near every fitting. Ensure the fire-rated route is continuous and uninterrupted through walls and floors, and confirm the required rating (E30, E60, E90) before installation.
| Region / Country | Primary Standard(s) | Additional Requirements | Certification Mark |
|---|---|---|---|
| International | IEC 61537 | Load testing and electrical continuity; RoHS; REACH | Third-party test reports |
| North America (USA) | NEMA VE1, NEC Article 392 | NEMA VE2 installation guidance; UL; ANSI/TIA-569 | UL / ETL Listed |
| North America (Canada) | CSA C22.2; ULC | c-UL-us listing; provincial electrical code | c-UL-us Listed |
| European Union | EN 61537 / IEC 61537 | CE marking; RoHS; LVD 2014/35/EU | CE marking |
| United Kingdom | BS EN 61537 | UKCA; BS 476 fire tests | UKCA / CE |
| Germany | DIN EN 61537 | DIN 4102 fire tests (E30–E90) | DIN / CE |
| France | NF EN 61537 | NF fire classification; CE | NF / CE |
| Australia / New Zealand | AS/NZS 61537 | AS/NZS 3000 Wiring Rules; RCM | RCM compliance |
| China | GB/T standards | CCC certification; GB 8624 fire classification | CCC mark |
| India | IS/IEC 61537 | BIS licence; TEC approval (telecom) | BIS / TEC |
| Japan | JIS standards | VCCI; TELEC approval for telecom equipment | JIS / TELEC |
| Middle East (Saudi Arabia) | SASO IEC 61537 | SABER conformity; ASTM E84 Class 1 | SASO / SABER |
| Middle East (UAE) | IEC 61537 | ADNOC specifications; DEWA submittal requirements | ADNOC / DEWA approval |
| Specification Parameter | Standard Range / Options | Notes |
|---|---|---|
| Product Name | Stainless Steel Wire Mesh Cable Tray Fire Resistant | BENDIN wire mesh cable tray |
| Material | galvanized/aluminum | Grade selected to suit the operating environment |
| Standard Width | 50–600 mm | Other widths available to order |
| Standard Height (Depth) | 25–150 mm | Depth chosen for load and cable volume |
| Wire Diameter | 3.5–6 mm | Heavier wire for higher load capacity |
| Standard Length | 3 m per section | Custom lengths available |
| Mesh Size | 50 mm * 100 mm (typical) | Adjustable for airflow and visibility |
| Finish / Color | metal or customize | Powder coating and colour options available |
| Installation Method | Bolted couplers; field cut and bend on site | Tool-free joint variants available |
| Load Capacity | Reference BENDIN load/deflection curves | Confirm against span and support spacing |
| Support Spacing | 1.5–2.0 m (typical) | Closer at bends and heavy loads |
| Brand | BDINDUSTRIAL | BENDIN |
| Model Number | cable tray-022 | |
| Certification | ISO,CE | Test reports available on request |
| Place of Origin | China | |
| Minimum Order Quantity | 100m | |
| Price | 5-55usd per meter | FOB / negotiable by quantity |
| Delivery Time | 25 work days | |
| Payment Terms | L/C,T/T,Western Union | |
| Supply Ability | 10000m | |
| Packaging Details | pallet | |
| Service Life | 20+ years | With correct installation and cable loading |
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
