Easy Install Stainless Steel Wire Mesh Cable Tray 50mm-600mm Width For Commercial Projects
Product Details
Easy Install Wire Mesh Cable Tray
,Commercial Wire Mesh Cable Tray
,Modular Wire Basket Tray
Stainless Steel Wire Mesh Cable Tray Easy Installation
1. Core Functional Advantages
BENDIN Stainless Steel Wire Mesh Cable Tray is designed for easy installation. Lightweight modular sections, simple bolted joints, and the ability to cut and bend the mesh on site let crews build even complex routes quickly and with minimal tools. Cables can be laid in from the top, bottom, or side at any point, which speeds first-fix and later adds, moves, and changes. The straightforward assembly method means the tray can be installed correctly by standard electrical crews without specialist training.
2. Application Scenarios and Certification Requirements
The easy-installation tray is specified for fast-track commercial projects, retrofit installations, data center fit-outs, and distributed ceiling runs where programme and labour cost are critical. Certification is matched to the market: IEC/EN/BS/NF/DIN 61537 and CE/RoHS for Europe, NEMA VE1/VE2 with NEC 392 and UL for North America, plus CCC, BIS, SASO/SABER, or JIS for other regions. BENDIN provides the declarations and reports needed to keep the fast programme compliant.
3. Specification Types and Suitability
BENDIN easy-installation trays come in heights of 25–150 mm and widths of 50–600 mm, with wire diameters of 3.5–6 mm and standard 3 m sections. A full accessory range — couplers, bends, tees, crossovers, and supports — allows the system to be assembled with minimal cutting. Stainless and galvanized options are available to suit the environment.
4. Installation Considerations
BENDIN trays join with simple bolted couplers and can be trimmed and shaped on site, so obstructions and late changes are handled immediately. Support spacing is normally 1.5–2.0 m, reduced at fittings. Pre-plan bend and tee locations to minimise cutting, and keep couplers within 0.6 m of every directional change. Deburr cut ends to protect cable jackets, and use the full accessory range for a clean, fast finish.
Certification Requirements for Stainless Steel Wire Mesh Cable Tray Easy Installation
| Region / Country | Primary Standard(s) | Additional Requirements | Certification Mark |
|---|---|---|---|
| International | IEC 61537 | Load testing and electrical continuity; RoHS; REACH | Third-party test reports |
| North America (USA) | NEMA VE1, NEC Article 392 | NEMA VE2 installation guidance; UL; ANSI/TIA-569 | UL / ETL Listed |
| North America (Canada) | CSA C22.2; ULC | c-UL-us listing; provincial electrical code | c-UL-us Listed |
| European Union | EN 61537 / IEC 61537 | CE marking; RoHS; LVD 2014/35/EU | CE marking |
| United Kingdom | BS EN 61537 | UKCA; BS 476 fire tests | UKCA / CE |
| Germany | DIN EN 61537 | DIN 4102 fire tests (E30–E90) | DIN / CE |
| France | NF EN 61537 | NF fire classification; CE | NF / CE |
| Australia / New Zealand | AS/NZS 61537 | AS/NZS 3000 Wiring Rules; RCM | RCM compliance |
| China | GB/T standards | CCC certification; GB 8624 fire classification | CCC mark |
| India | IS/IEC 61537 | BIS licence; TEC approval (telecom) | BIS / TEC |
| Japan | JIS standards | VCCI; TELEC approval for telecom equipment | JIS / TELEC |
| Middle East (Saudi Arabia) | SASO IEC 61537 | SABER conformity; ASTM E84 Class 1 | SASO / SABER |
| Middle East (UAE) | IEC 61537 | ADNOC specifications; DEWA submittal requirements | ADNOC / DEWA approval |
Common Specifications of Stainless Steel Wire Mesh Cable Tray Easy Installation
| Specification Parameter | Standard Range / Options | Notes |
|---|---|---|
| Product Name | Stainless Steel Wire Mesh Cable Tray Easy Installation | BENDIN wire mesh cable tray |
| Material | galvanized /aluminum | Grade selected to suit the operating environment |
| Standard Width | 50–600 mm | Other widths available to order |
| Standard Height (Depth) | 25–150 mm | Depth chosen for load and cable volume |
| Wire Diameter | 3.5–6 mm | Heavier wire for higher load capacity |
| Standard Length | 3 m per section | Custom lengths available |
| Mesh Size | 50 mm × 100 mm (typical) | Adjustable for airflow and visibility |
| Finish / Color | metal color or customize | Powder coating and colour options available |
| Installation Method | Bolted couplers; field cut and bend on site | Tool-free joint variants available |
| Load Capacity | Reference BENDIN load/deflection curves | Confirm against span and support spacing |
| Support Spacing | 1.5–2.0 m (typical) | Closer at bends and heavy loads |
| Brand | BDINDUSTRIAL | BENDIN |
| Model Number | cable tray-021 | |
| Certification | ISO,CE | Test reports available on request |
| Place of Origin | China | |
| Minimum Order Quantity | 100m | |
| Price | 5-65usd | FOB / negotiable by quantity |
| Delivery Time | 25 days | |
| Payment Terms | L/C,T/T,Western Union | |
| Supply Ability | 10000m | |
| Packaging Details | pallet | |
| Service Life | 20+ years | With correct installation and cable loading |
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
