Corrosion Resistant Stainless Steel Wire Mesh Cable 3.5mm Wire Customized Color

Stainless Steel Wire Mesh Cable Tray Corrosion Resistant

1. Core Functional Advantages

BENDIN Stainless Steel Wire Mesh Cable Tray is engineered for corrosion-resistant service. It is manufactured from 304 or 316/316L stainless steel, so the tray resists rust, chemical attack, and salt spray without depending on a coating that can chip or peel. The open welded mesh provides a high strength-to-weight ratio, ventilates cables, and sheds water and debris instead of trapping them. Because protection comes from the metal itself, cut edges remain as corrosion resistant as the rest of the tray, giving a long, low-maintenance service life in wet, humid, and chemically aggressive environments.

2. Application Scenarios and Certification Requirements

BENDIN corrosion-resistant wire mesh trays are specified for coastal and marine facilities, chemical and petrochemical plants, food, beverage and pharmaceutical production, and wastewater treatment. In these areas certification is essential: international projects reference IEC 61537 (and EN/BS/NF/DIN 61537), North American projects NEMA VE1/VE2 with NEC Article 392 and UL, and EU projects CE and RoHS. Indian, Middle East, and Japanese projects may require BIS, SASO/SABER, or JIS approval respectively. BENDIN can provide material test certificates (MTC) and declarations so the specified stainless grade can be traced and verified before purchase.

3. Specification Types and Suitability

BENDIN stainless steel wire mesh cable trays are supplied with heights from 25 mm to 150 mm and widths from 50 mm to 600 mm, with wire diameters of 3.5 mm to 6 mm and standard 3 m sections. Mesh openings are typically 50 mm × 100 mm. Grade 304 is recommended for general indoor and industrial areas, while grade 316/316L is selected for coastal, chemical, or chloride-rich conditions. Common finishes are pickled and passivated or electropolished for maximum cleanliness and corrosion resistance.

4. Installation Considerations

Installation follows the standard BENDIN wire mesh method: sections are joined with bolted couplers, and the mesh can be cut and bent on site with basic tools. Supports are placed at 1.5–2.0 m intervals, reduced near bends and heavy loads. Because stainless trays may not provide continuous electrical continuity through every joint, dedicated grounding jumpers should be used where bonding is required. Cut ends should be deburred, and stainless fixings used to avoid galvanic corrosion.

Certification Requirements for Stainless Steel Wire Mesh Cable Tray Corrosion Resistant

Common Specifications of Stainless Steel Wire Mesh Cable Tray Corrosion Resistant