150mm Heavy Duty Perforated Cable Tray Q235 Steel ASTM A123 Galvanized Finish
Product Details
150mm Perforated Cable Tray
,ASTM A123 Perforated Cable Tray
,150mm Perforated Trunking
150mm Perforated Cable Tray Heavy Duty
BENDIN 150mm Perforated Cable Tray Heavy Duty is a heavy-duty hot dip galvanized tray with a 150mm width. Fabricated from Q235 cold rolled steel and hot dip galvanized to ASTM A123, it carries heavy power cables with strong corrosion protection.
Application and Functions in Different Scenarios
Core Functions
1. Efficient Heat Dissipation: the perforated base releases heat generated by loaded power, control and instrument cables, preventing overheating and extending cable service life.
2. Corrosion Protection: hot dip galvanized steel to ASTM A123 resists humidity, salt spray and industrial fumes so the tray stays reliable in demanding environments.
3. Organized Cable Routing: the channel separates power cables from signal cables, reducing electromagnetic interference to sensitive control instruments.
4. Fast Installation and Maintenance: the open perforated design allows quick cable laying, inspection, drop-out and later system expansion without complex civil work.
5. Heavy Load Support: reinforced side rails carry heavy power cable bundles with an open area ratio of 20% to 35% for heat dissipation.
Typical Application Scenarios
Power plants and substations.
Petrochemical and heavy industry.
Steel and cement plants.
Rail and infrastructure projects.
Outdoor and coastal industrial sites.
BENDIN Types & Material Specifications:
Produced from Q235 low carbon steel hot dip galvanized to ASTM A123 with staggered round holes and 20%-35% open area.
1. Hot Dip Galvanized (HDG) Perforated Cable Tray: heavy zinc layer for outdoor and industrial use.
2. Heavy-Duty HDG Perforated Tray: thick plate and reinforced rails for heavy power cables.
3. Medium-Duty HDG Perforated Tray: balanced strength for general infrastructure.
4. HDG Tray with Cover: matching lid for dust and impact protection.
5. HDG Solid Bottom Perforated Tray: closed base for dusty environments.
6. Custom Bends, Tees and Reducers: fabricated to the project layout.
Accessories include HDG splice plates, brackets, expansion joints, end caps and cover plates.
Global Certification & Standard Requirements and Common Specifications Table:
| Region / Standard System | Main Certification & Standard | Requirements for 150mm Perforated Cable Tray Heavy Duty | Common Specifications |
|---|---|---|---|
| North America | NEMA VE1, NEMA VE2, UL, CSA C22.2 No.126.1, NEC Article 392 | NEMA VE1 defines the mechanical load test; UL covers fire resistance and CSA is required for Canadian projects. Corrosion and load deflection tests must be passed. | Width 150 mm; side height 100-150 mm; thickness 1.0-2.5 mm; standard length 2m / 3m |
| European Union | IEC 61537, BS EN 61537, CE Marking | IEC 61537 is the core international standard for cable tray systems; CE marking is mandatory for the EU market, with corrosion aging and mechanical load testing for industrial projects. | Width 150 mm; side rail height 100-150 mm; thickness 1.0-2.5 mm; 2m / 3m standard length |
| China | GB/T 23639, GB/T 10216, CCC (fire-rated option) | GB/T 23639 governs the mechanical performance of cable trays; CCC certification is required for fire-resistant versions on large projects. | Width 150 mm; thickness 1.0-2.5 mm; standard length 2m / 3m |
| Australia & New Zealand | AS/NZS 3012 | Specifies mechanical strength and corrosion aging tests for industrial cable support systems. | Hot Dip Galvanized Steel to ASTM A123; support span up to 3 m |
| International Oil & Chemical Industry | API Standard, ISO 9227 | API standard for petrochemical refineries; ISO 9227 salt spray test for material qualification, normally project specified. | Hot Dip Galvanized Steel to ASTM A123; heavy duty sections, support span up to 3 m |
BENDIN Installation & Selection Considerations
1. Material and Surface Selection: evaluate the corrosive media on site and confirm hot dip galvanized steel to ASTM A123 with the correct surface treatment before ordering.
2. Avoid Galvanic Corrosion: never let dissimilar metals touch directly; use matching bolts and insulating gaskets between the tray and carbon steel brackets.
3. Load Calculation and Support Span: calculate the total cable weight to select the correct plate thickness and load class, and reduce the support span where heavy cables concentrate.
4. Thermal Expansion Control: install expansion joints on long straight runs to absorb thermal deformation caused by temperature changes.
5. Continuous Earthing and Bonding: keep continuous electrical bonding across all metal sections, mandatory in hazardous classified zones.
6. Separation of Power and Instrument Cables: use dividers to separate power cables from instrument cables and cut electromagnetic interference.
7. Cutting and Re-Protection on Site: cut with the correct tools and re-protect every cut edge and weld so the corrosion-resistant surface is restored.
8. Surface Inspection Before Installation: check the coating before installation, protect the surface during transport and repair any scratches that expose bare metal.
BENDIN 150mm Perforated Cable Tray Heavy Duty delivers heavy load capacity and long-life HDG corrosion protection for demanding industrial projects.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
