Metallic 100mm Perforated Cable Tray 0.8mm to 3.0mm Thickness IEC 61537 Certified

Metallic Perforated Cable Tray 100mm

BENDIN Metallic Perforated Cable Tray 100mm is a ventilated metal cable support with a 100mm wide perforated base for efficient heat dissipation. It is designed for server rooms, data centers and control areas where dense power and signal cables require reliable support and cooling.

Application and Functions in Different Scenarios

Core Functions

1. Efficient Heat Dissipation: the perforated base releases heat generated by loaded power, control and instrument cables, preventing overheating and extending cable service life.
2. Corrosion Protection: carbon steel with galvanized or stainless finish resists humidity, salt spray and industrial fumes so the tray stays reliable in demanding environments.
3. Organized Cable Routing: the channel separates power cables from signal cables, reducing electromagnetic interference to sensitive control instruments.
4. Fast Installation and Maintenance: the open perforated design allows quick cable laying, inspection, drop-out and later system expansion without complex civil work.
5. Mechanical Strength and Safety: reinforced side rails support heavy cable loads and provide continuous metal bonding for earthing.

Typical Application Scenarios

Server rooms and data centers.
Control and instrumentation rooms.
Network and telecommunication areas.
Industrial automation workshops.
Commercial building risers.

BENDIN Types & Material Specifications:

Available in carbon steel with galvanized or stainless finishing, perforated or solid bottom.

1. Carbon Steel Perforated Cable Tray: economical base for galvanized or painted finishing.
2. Galvanized Metal Perforated Tray: zinc coated for corrosion resistance.
3. Stainless Steel Metal Perforated Tray: superior corrosion resistance for harsh sites.
4. Ventilated Metal Perforated Tray: perforated base for heat dissipation.
5. Heavy-Duty Metal Perforated Tray: reinforced rails for heavy loads.
6. Custom Bends, Tees and Reducers: fabricated to the project layout.

Accessories include splice plates, brackets, expansion joints, end caps and cover plates.

Global Certification & Standard Requirements and Common Specifications Table:

BENDIN Installation & Selection Considerations

1. Material and Surface Selection: evaluate the corrosive media on site and confirm carbon steel with galvanized or stainless finish with the correct surface treatment before ordering.
2. Avoid Galvanic Corrosion: never let dissimilar metals touch directly; use matching bolts and insulating gaskets between the tray and carbon steel brackets.
3. Load Calculation and Support Span: calculate the total cable weight to select the correct plate thickness and load class, and reduce the support span where heavy cables concentrate.
4. Thermal Expansion Control: install expansion joints on long straight runs to absorb thermal deformation caused by temperature changes.
5. Continuous Earthing and Bonding: keep continuous electrical bonding across all metal sections, mandatory in hazardous classified zones.
6. Separation of Power and Instrument Cables: use dividers to separate power cables from instrument cables and cut electromagnetic interference.
7. Cutting and Re-Protection on Site: cut with the correct tools and re-protect every cut edge and weld so the corrosion-resistant surface is restored.
8. Surface Inspection Before Installation: check the coating before installation, protect the surface during transport and repair any scratches that expose bare metal.

BENDIN Metallic Perforated Cable Tray 100mm provides ventilated, well-organized cable support for server rooms, data centers and industrial control areas.