300mm Cable Ladder Tray FRP Fire Retardant Resin for Data Center Support

FRP Cable Ladder 300mm Data Center is the mid width composite route for white space and telecom rooms, where 300 mm carries a full rack row of power and structured cabling while staying light enough for one technician to handle above live equipment.

The ladder is pultruded from E glass in a fire retardant resin with UV stabilization, in 300 mm usable width, rail heights of 75 mm to 150 mm and rung pitch of 225 mm or 300 mm, supplied in 3 m modules with matching bends, tees and brackets. Stainless fasteners keep the joints reliable in a conditioned hall.

In a data centre the material choice is about risk as much as corrosion. A composite ladder cannot conduct, so a dropped section or a loose tool cannot bridge a busway or a PDU feed, and there is no requirement to bond every joint into the earthing system, which simplifies the installation and the inspection.

The composite also does not shield radio, so WiFi, DAS and small cell coverage inside the hall is not disturbed by the cable route overhead, and the low thermal conductivity prevents condensation forming on the rungs in a chilled aisle.

BENDIN pultrudes and assembles FRP ladder at 10000 m per week with 180 staff and thirty years of cable support experience, exporting 60 to 70 percent of output to data centre and telecom contractors. Resin cure, colour and rung strength are checked per batch, and widths can be produced to the hall layout.

Minimum order 100 m, delivery 15 to 25 working days, 15 to 50 USD per metre, pallet packing, terms L/C, D/A, D/P or T/T. Send the rack layout, the load per metre and the fire class and we will return the support spacing and the accessory list.

BENDIN holds ISO 9001 quality certification and issues CE Declarations of Conformity. The standards above state the design and test basis of this product; third party test reports or national approvals are supplied on request and are not implied unless confirmed in the contract.

Dimensions, rung spacing and surface treatment are produced to project drawings. Load and deflection calculations are issued for spans above 3 m.

• Data halls and white space
• Telecom and edge computing rooms
• Server room overhead distribution
• Control and instrumentation rooms
• Laboratories and clean rooms

Q: Why use composite above live racks?
A: It cannot conduct, so a dropped section or tool cannot bridge a busway or PDU feed, and no bonding is needed at the joints.

Q: Does it affect WiFi or DAS coverage?
A: No. Fiberglass does not shield radio signals, so in-hall wireless coverage is unaffected by the overhead route.

Q: Will the ladder support a full rack row of cable?
A: Yes, within the stated load table. Send the load per metre and span and we issue a deflection check for the layout.

Q: What is the minimum order?
A: Minimum order 100 m, delivery 15 to 25 working days, prices from 15 to 50 USD per metre.