Powder Coated Cable Ladder Anti Rust Polyester Coat 150mm-900mm Width Build

Powder Coated Cable Ladder Anti-Rust is the finish specified where appearance, colour coding and chemical resistance matter alongside corrosion protection: visible plant rooms, hospital and airport technical floors, food plants and any route where the client wants a clean, identifiable installation rather than bare galvanized steel.

The ladder is built from galvanized or stainless steel with 150 mm to 900 mm widths, 75 mm to 250 mm rail height, side rails of 1.5 mm to 3.0 mm and rungs of 2.5 mm to 5.0 mm at 225 mm, 300 mm or 450 mm pitch. The powder coat is applied over a galvanized substrate, forming a duplex system that combines barrier protection with sacrificial protection at any damaged point.

Anti-rust performance comes from the duplex principle: the zinc layer under the powder coat stops corrosion from spreading if the film is scratched, while the powder coat keeps the zinc from being consumed, so the practical service life in a C4 atmosphere is significantly longer than either coating alone.

The fire rated version of this ladder is used where a route must maintain circuit integrity: steel construction with an intumescent or fire resistant coating system has been tested to BS 476, EN 1363 series and IEC 60331 protocols, so emergency lighting, fire alarm and smoke control circuits keep working during a fire.

BENDIN produces coated ladder at up to 50000 m per week with 180 staff and thirty years of surface treatment experience, exporting 60 to 70 percent of output to contractors with colour and marking requirements. Coating thickness, adhesion and colour are checked against the approved sample on every batch.

Minimum order 100 m, 15 to 25 working day delivery, 10 to 20 USD per metre, carton, box or wooden case packing, terms L/C, D/P or T/T. Send the RAL colour, the environment class and the fire requirement and we will confirm the coating system and the test documentation available.

BENDIN holds ISO 9001 quality certification and issues CE Declarations of Conformity. The standards above state the design and test basis of this product; third party test reports or national approvals are supplied on request and are not implied unless confirmed in the contract.

Dimensions, rung spacing and surface treatment are produced to project drawings. Load and deflection calculations are issued for spans above 3 m.

• Hospitals, airports and public buildings
• Food, beverage and pharmaceutical plants
• Fire alarm and emergency lighting routes
• Visible plant rooms and technical floors
• Coastal and chemical installations

Q: What is a duplex coating?
A: It is powder coat over hot dip galvanizing. The powder keeps the zinc from being consumed, and the zinc protects the steel wherever the film is scratched.

Q: Which fire standards can be met?
A: The fire rated version is tested to BS 476 and EN 1363 protocols, with circuit integrity data to IEC 60331 available on request.

Q: Can the colour match the ceiling?
A: Yes. Any RAL shade can be produced, and colour coding normal, essential and emergency supplies is a common requirement we handle.

Q: What is the minimum order?
A: Minimum order 100 m, delivery 15 to 25 working days, prices from 10 to 20 USD per metre.