Lightweight Cable Ladder Tray Pre Galvanized 150mm-900mm Width Easy Handling

Lightweight Cable Ladder Easy Handling is the low load class built for the many routes that carry lighting, control and small power cable rather than main feeders: retail units, offices, workshops, warehouses and plant rooms where speed of installation decides the cost of the job.

The ladder is produced in 100 mm, 150 mm, 300 mm and 450 mm widths with 2400 mm, 3000 mm or 6000 mm modules, in galvanized steel, aluminum or stainless steel. Thin wall sections and open rung geometry keep the mass low, so one installer can carry and position a module and fix it without a second pair of hands.

Easy handling is a safety and productivity feature, not a compromise. Lighter modules mean fewer manual handling incidents, faster ceiling work and less fatigue across a long shift, while the rung pitch of 225 mm still supports the cable at the spacing the standard requires.

The ladder is available with a full accessory family: bends, tees, reducers, wall and ceiling brackets, couplers and cable clamps, so a complete route can be built from one delivery. Coatings range from pre-galvanized and hot dip galvanized to powder coat in standard RAL colours for visible commercial ceilings.

BENDIN produces this family at 30000 m per week with 180 staff and thirty years of cable support manufacturing, exporting 60 to 70 percent of output to contractors and distributors. The product is CE marked, RoHS compliant and produced under ISO 9001, and every order is checked for straightness and rung position before packing.

Minimum order 200 m, 5 to 25 day delivery, 5 to 30 USD per metre, pallet or bulk packing, terms L/C, D/P, T/T or Western Union. Send the ceiling plan and cable sizes and we will confirm the width, the coating and the bracket schedule.

BENDIN holds ISO 9001 quality certification and issues CE Declarations of Conformity. The standards above state the design and test basis of this product; third party test reports or national approvals are supplied on request and are not implied unless confirmed in the contract.

Dimensions, rung spacing and surface treatment are produced to project drawings. Load and deflection calculations are issued for spans above 3 m.

• Retail, office and commercial ceilings
• Workshops and light manufacturing
• Warehouse lighting and small power
• Plant rooms and service corridors
• Temporary and event installations

Q: Is a light duty ladder acceptable for lighting circuits?
A: Yes. It is designed for lighting, control and small power cable, and the rung pitch still supports the cable at the spacing the standard requires.

Q: Which finish suits an indoor ceiling?
A: Pre-galvanized is the economical choice for dry interiors, with hot dip galvanizing for humid areas and powder coat in RAL colours for visible ceilings.

Q: Can I order short cut lengths?
A: Yes. Modules can be cut to length and short sections supplied for retrofit work where a full 3 m module will not fit.

Q: What is the minimum order and lead time?
A: Minimum order 200 m, delivery 5 to 25 days, prices from 5 to 30 USD per metre.