Corrosion Resistant Steel Cable Ladder Hot Dip 75mm-250mm Depth for Chemical Plants
Product Details
Corrosion Resistant Galvanized Cable Ladder
,3m HDG Cable Ladder
,Corrosion Resistant Ladder Tray
Hot-Dip Galvanized Cable Ladder Corrosion Resistant is the swift assembly route: a galvanized steel ladder built to be installed quickly on site while still delivering the coating life that outdoor and process plant environments demand. It suits contractors who need a route erected in days, not weeks, without giving up corrosion performance.
The section uses carbon steel rails with 75 mm to 250 mm height and 150 mm to 900 mm width, rungs at 225 mm, 300 mm or 450 mm pitch, and support spans from 1.5 m to 9 m depending on the load case. Coating options include hot dip galvanizing to ISO 1461, pre-galvanized strip and powder coating, with duplex systems for severe atmospheres.
The swift detail is in the connections: pre punched rail ends, slot and bolt couplers and a fitting family that aligns without field drilling, which removes the main source of delay and of coating damage on a construction site. Every cut and weld is galvanized after fabrication so the protection is not broken by installation work.
Corrosion resistance is quantified rather than claimed. A 65 to 85 micrometre zinc layer gives decades of service in C3 and C4 atmospheres, and the sacrificial action of zinc protects the section where a cable is dragged over a rung or a bolt is tightened, which is where painted systems fail first.
BENDIN fabricates this ladder at up to 50000 m per week with 180 staff and thirty years of galvanizing experience, exporting 60 to 70 percent of production to construction, power and industrial projects. Each batch is checked for coating thickness, rung position and coupler fit before it leaves the plant.
Minimum order 100 m, 15 to 25 working day delivery, 10 to 30 USD per metre, carton, box or wooden case packing, terms L/C, D/P or T/T. Share the route drawing and we will return a kit list with couplers, bends and hanger brackets sized for your spans.
Certification and Standard Reference| Standard / Specification | Scope of Application | BENDIN Status |
|---|---|---|
| ISO 1461 / ASTM A123 | Hot dip galvanized coating, thickness and adhesion | Coating thickness measured per batch; record supplied |
| IEC 61537 / BS EN 61537 | Load, deflection and electrical continuity | Design calculation and continuity check per order |
| NEMA VE 1 / CSA C22.2 | Cable tray and ladder system requirements | Design compliance statement; submittal on request |
| EN 10025 | Carbon steel grade of rails and rungs | Material certificates and design reference supplied |
| ISO 12944 (reference) | Corrosivity category of the installation | Coating system selected to the declared corrosivity class |
| ISO 9001:2015 | Quality management system | ISO 9001 certified; certificate copy on request |
| CE marking | EU construction products as applicable | CE Declaration of Conformity issued with shipment |
BENDIN holds ISO 9001 quality certification and issues CE Declarations of Conformity. The standards above state the design and test basis of this product; third party test reports or national approvals are supplied on request and are not implied unless confirmed in the contract.
Technical Parameters| Parameter | Standard Range | Customization Available |
|---|---|---|
| Usable width | 150 - 900 mm (6 - 36 in) | up to 1200 mm |
| Rail height | 75 - 250 mm (3 - 10 in) | to drawing |
| Rung spacing | 225 / 300 / 450 mm | custom |
| Support span | 1.5 - 9 m | engineered |
| Standard length | 3000 / 6000 mm | cut to order |
| Coating | HDG, pre-galvanized, powder coat | Duplex system |
| Fasteners | Galvanized bolts | Stainless for C5 |
| Load class | Per IEC 61537 | Project specific |
Dimensions, rung spacing and surface treatment are produced to project drawings. Load and deflection calculations are issued for spans above 3 m.
Typical Applications- Industrial plant and pipe rack routes
- Power and substation cable runs
- Commercial and infrastructure projects
- Water treatment and pump stations
- Outdoor and coastal installations
Q: What makes the assembly faster?
A: Pre punched rail ends and slot and bolt couplers align without drilling, which removes the main cause of delay and of coating damage during installation.
Q: Are cut ends protected?
A: Yes. Galvanizing is applied after fabrication, so every cut, weld and hole is coated rather than left as bare steel.
Q: Which span can be supported?
A: From 1.5 m to 9 m depending on rail size and cable load, with a calculation issued for the specified case.
Q: What is the minimum order?
A: Minimum order 100 m, delivery 15 to 25 working days, prices from 10 to 30 USD per metre.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
