Welded Steel Cable Ladder High Rigidity 150mm-900mm Width ISO 1461 Finish

Welded Cable Ladder High Rigidity is the wire ladder rack format that holds its shape when a route is loaded, walked on during installation or subjected to vibration from machinery nearby. Fully welded rung to rail joints remove the play that riveted or clipped racks develop over time, so the ladder behaves as one stiff beam between supports.

The rack is produced from 4 mm to 6 mm wire rungs welded to formed steel side rails, or from aluminum for weight sensitive work, in 18 inch and metric widths with rung pitch from 150 mm to 300 mm. Welding is done on fixtures that hold squareness, then the whole assembly is hot dip galvanized or left mill finish depending on the environment.

High rigidity shows up in the details: less sag between hangers, no rattle when a cable is pulled through, and a stable base for cable ties and clamps. On a plant route shared with pumps, compressors or overhead cranes, that translates into longer cable jacket life because the support is not fretting against the cable.

The open wire format is also the fastest to load. Cables are laid from above, tied at every rung, and inspected from below without removing covers, which shortens installation time and simplifies later additions when a new circuit is needed on an existing route.

BENDIN welds this rack in house at 10000 m per week with a 180 person team and thirty years of cable support manufacturing, exporting 60 to 70 percent to industrial, commercial and infrastructure buyers. Weld quality, zinc thickness and rung position are checked on every batch, and custom widths, colours and logo marking are available.

Minimum order 100 m, 20 working day delivery, 15 to 50 USD per metre, pallet packing, L/C, T/T or Western Union. Give us the route width, the load and the environment and we will confirm wire diameter, rung pitch and the coating system that fits.

BENDIN holds ISO 9001 quality certification and issues CE Declarations of Conformity. The standards above state the design and test basis of this product; third party test reports or national approvals are supplied on request and are not implied unless confirmed in the contract.

Dimensions, rung spacing and surface treatment are produced to project drawings. Load and deflection calculations are issued for spans above 3 m.

• Industrial plants with vibration and machinery
• Warehouse and logistics ceiling routes
• Commercial buildings and car parks
• Utility and telecom cable racks
• Retrofit routes above existing services

Q: Why welded rather than riveted rungs?
A: Welded joints remove the play that clipped or riveted racks develop, so the rack behaves as one stiff beam and does not fret against the cable jacket under vibration.

Q: Can the rack be colour matched?
A: Yes. Powder coating in RAL colours and embossed logo marking are available for visible installations and OEM programmes.

Q: What widths and rung pitches are standard?
A: 450 mm (18 inch) as standard, with 300, 600 mm and custom widths, and rung pitch of 150, 225 or 300 mm to drawing.

Q: What is the minimum order?
A: Minimum order is 100 m with 20 working day delivery, packed on pallets, on L/C, T/T or Western Union terms.