Wide Span Steel Cable Ladder 6m Section Hot Dip Galvanized 900mm Width

Wide Span Cable Ladder Heavy Duty is the 600 mm class that data centre and industrial projects choose when a single route has to carry both power and structured cabling across a hall without a forest of hangers. The extra width reduces the number of parallel runs, which cuts both material count and the coordination effort on a congested ceiling.

The ladder is built from 2.5 mm to 3.0 mm steel rails or from aluminum and stainless sections depending on the environment, with 225 mm or 300 mm rung pitch and 3 m modules as standard lengths, cut to 6 m where transport allows. Wide rungs are supported at closer pitch so a 600 mm span does not deflect under a dense bundle.

Heavy duty here means three things together: section depth to control deflection, rung stiffness to avoid cable pinching at the supports, and a coating that survives the environment. Hot dip galvanized steel covers outdoor and plant use, stainless covers washdown and chloride, aluminum covers weight sensitive ceilings in data halls.

Accessories are what make a wide route work: centre supports for the middle of the width, trapeze hangers, reducers to step down to 450 mm or 300 mm branches, and covers where dust or drips have to be excluded. All are produced to the same width family so field modification is minimal.

BENDIN manufactures this family in house with 10000 m weekly capacity, a 180 person workforce and thirty years of cable support experience, exporting 60 to 70 percent of output to contractors and data centre builders. Each wide span section is checked for twist and rung squareness before packing, because a 600 mm ladder amplifies any error over a 3 m length.

Minimum order 100 m, 25 working day delivery, pallet packing, L/C, T/T or Western Union terms, prices from 11 to 35 USD per metre depending on material. Tell us the load per metre and the hanger grid and we will confirm the rail depth and the centre support arrangement.

BENDIN holds ISO 9001 quality certification and issues CE Declarations of Conformity. The standards above state the design and test basis of this product; third party test reports or national approvals are supplied on request and are not implied unless confirmed in the contract.

Dimensions, rung spacing and surface treatment are produced to project drawings. Load and deflection calculations are issued for spans above 3 m.

• Data centre main power and containment routes
• Industrial plant interconnecting racks
• Warehouse and logistics ceiling distribution
• Airport and metro utility corridors
• Water treatment and pump station galleries

Q: Do I need a centre support at 600 mm width?
A: For dense bundles and spans above 3 m we recommend a centre support or a deeper rail. We confirm the arrangement from the load per metre and the hanger grid.

Q: Which material suits a data hall?
A: Aluminum for weight sensitive ceilings, HDG steel for the main spine, and stainless where washdown or coastal air is present. All share the same fitting family.

Q: Can the width step down along the route?
A: Yes. Reducers step from 600 mm to 450 mm or 300 mm branches, produced in the same material and finish.

Q: What is the price range?
A: From 11 to 35 USD per metre depending on material and finish, minimum order 100 m with 25 working day delivery.