Stainless Steel 8 Inch Perforated Metal Cable Tray with Open Punched Base Ventilated
Product Details
Stainless Perforated Cable Tray
,8 Inch Perforated Cable Tray
,Stainless Perforated Trough
Stainless Steel Perforated Cable Tray 8 Inch
BENDIN Stainless Steel Perforated Cable Tray 8 Inch is a ventilated cable support made from stainless steel plate with regularly punched holes. The 8 inch wide channel suits medium to heavy duty cable runs, while the stainless surface resists moisture, salt spray, acid and alkali vapors common in industrial and marine sites.
Application and Functions in Different Scenarios
Core Functions
1. Efficient Heat Dissipation: the perforated base releases heat generated by loaded power, control and instrument cables, preventing overheating and extending cable service life.
2. Corrosion Protection: stainless steel 304 / 316 resists humidity, salt spray and industrial fumes so the tray stays reliable in demanding environments.
3. Organized Cable Routing: the channel separates power cables from signal cables, reducing electromagnetic interference to sensitive control instruments.
4. Fast Installation and Maintenance: the open perforated design allows quick cable laying, inspection, drop-out and later system expansion without complex civil work.
5. Mechanical Strength and Safety: reinforced side rails support heavy cable loads and provide continuous metal bonding for earthing.
Typical Application Scenarios
Chemical and petrochemical plants: acid and alkali vapor areas.
Offshore and marine projects: salt spray corrosion zones.
Water and wastewater treatment plants: humid and corrosive fumes.
Pharmaceutical and food factories: hygienic and rust-free workshops.
Power industry: coastal substations and renewable energy projects.
BENDIN Types & Material Specifications:
Classified mainly by stainless steel grade, load capacity and accessory configuration.
1. 304 Stainless Steel Perforated Cable Tray: general corrosion resistance for humid, low-salt environments.
2. 316L Stainless Steel Perforated Cable Tray: superior chloride and salt spray resistance for coastal and offshore sites.
3. Duplex Stainless Steel (2205/2507): for highly corrosive heavy industry and offshore high-load projects.
4. Light-Duty Perforated Tray: thin plate for instrument and low-voltage control cables.
5. Heavy-Duty Perforated Tray: thicker plate and reinforced rails for heavy power cables.
6. Perforated Tray with Divider: internal separators for power and signal cables.
Accessories include stainless steel splice plates, brackets, expansion joints, end caps, wall brackets and cover plates.
Global Certification & Standard Requirements and Common Specifications Table:
| Region / Standard System | Main Certification & Standard | Requirements for Stainless Steel Perforated Cable Tray 8 Inch | Common Specifications |
|---|---|---|---|
| North America | NEMA VE1, NEMA VE2, UL, CSA C22.2 No.126.1, NEC Article 392 | NEMA VE1 defines the mechanical load test; UL covers fire resistance and CSA is required for Canadian projects. Corrosion and load deflection tests must be passed. | Width 100-1200 mm; side height 50-150 mm; thickness 1.2-3.0 mm; standard length 3m / 6m |
| European Union | IEC 61537, BS EN 61537, CE Marking | IEC 61537 is the core international standard for cable tray systems; CE marking is mandatory for the EU market, with corrosion aging and mechanical load testing for industrial projects. | Width 100-1200 mm; side rail height 50-150 mm; thickness 1.2-3.0 mm; 3m / 6m standard length |
| China | GB/T 23639, GB/T 10216, CCC (fire-rated option) | GB/T 23639 governs the mechanical performance of cable trays; CCC certification is required for fire-resistant versions on large projects. | Width 100-1200 mm; thickness 1.2-3.0 mm; standard length 3m / 6m |
| Australia & New Zealand | AS/NZS 3012 | Specifies mechanical strength and corrosion aging tests for industrial cable support systems. | Stainless Steel 304 / 316; support span up to 3 m |
| International Oil & Chemical Industry | API Standard, ISO 9227 | API standard for petrochemical refineries; ISO 9227 salt spray test for material qualification, normally project specified. | Stainless Steel 304 / 316; heavy duty sections, support span up to 3 m |
BENDIN Installation & Selection Considerations
1. Material and Surface Selection: evaluate the corrosive media on site and confirm stainless steel 304 / 316 with the correct surface treatment before ordering.
2. Avoid Galvanic Corrosion: never let dissimilar metals touch directly; use matching bolts and insulating gaskets between the tray and carbon steel brackets.
3. Load Calculation and Support Span: calculate the total cable weight to select the correct plate thickness and load class, and reduce the support span where heavy cables concentrate.
4. Thermal Expansion Control: install expansion joints on long straight runs to absorb thermal deformation caused by temperature changes.
5. Continuous Earthing and Bonding: keep continuous electrical bonding across all metal sections, mandatory in hazardous classified zones.
6. Separation of Power and Instrument Cables: use dividers to separate power cables from instrument cables and cut electromagnetic interference.
7. Cutting and Re-Protection on Site: cut with the correct tools and re-protect every cut edge and weld so the corrosion-resistant surface is restored.
8. Surface Inspection Before Installation: check the coating before installation, protect the surface during transport and repair any scratches that expose bare metal.
BENDIN Stainless Steel Perforated Cable Tray 8 Inch is a premium cable management solution for corrosive, high-humidity and coastal environments, supplied in 304, 316L and duplex grades complying with IEC, NEMA, UL and GB standards.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
