Heavy Duty Aluminum Ladder Cable Tray 6063 T5 Alloy Lightweight for Data Center Route
Product Details
Heavy Duty Aluminium Cable Tray
,Lightweight Aluminium Cable Tray
,6063 T5 Aluminium Trunking
Inside a live data center, every kilogram hung above the racks matters. The BENDIN Heavy Duty Aluminium Cable Tray Lightweight is purpose built for that constraint, combining a 6063-T5 extrusion with a hollow rail profile so a full meter of tray adds only a fraction of the dead load of a steel system. Facility teams can add high density cable pathways without recalculating ceiling or raised floor capacity.
Light dead load does not mean light performance. The rail and rung geometry is tuned for concentrated server and power feeds, holding dense bundles across multi tier racks. It lets you run fibre, copper and busbar in parallel lanes while keeping the supporting structure simple and predictable.
Installation crews feel the difference immediately. Sections are light enough for one technician to lift into position, and they butt together cleanly so overhead work is faster and safer. Deburred edges protect delicate data cables during pulling, which matters when a single damaged bundle can interrupt a whole rack.
Every BENDIN tray is extruded, punched and finished under one roof, then dimensionally checked before packing. That consistency is what keeps long data hall runs aligned and avoids time lost to re drilling or forcing couplers on site.
The result is a data center cable tray that balances weight, strength and airflow. It integrates with BENDIN trapeze hangers, wall brackets and raised floor supports, so a complete pathway can be delivered as one coordinated package.
| Certificate Held | Compliance Status |
|---|---|
| ISO 9001:2015 | Quality management system - certified |
| CE | CE conformity, EN 61537 cable tray systems - declared |
| Parameter | Specification |
|---|---|
| Alloy / temper | 6063-T5 aluminium |
| Dead load | Approx. 1.6 kg/m at 300 mm width |
| Working load | Up to 120 kg/m at 1.5 m span |
| Width range | 100 - 800 mm |
| Side rail height | 50 / 75 / 100 mm |
| Wall thickness | 1.2 / 1.5 / 2.0 mm |
| Section length | 2000 / 3000 / 6000 mm |
| Finish | Mill / anodized / powder coated |
BENDIN focuses on aluminium cable management for mission critical spaces. In house extrusion lets us fine tune the profile for low weight and high stiffness, and our engineering team supports load and routing calculations for data halls and telecom rooms.
About 1.6 kg per meter at 300 mm width, far less than a steel system, so ceiling and raised floor loads stay low.
Yes. It is rated up to 120 kg/m at a 1.5 m span, which suits multi tier data rack layouts.
Yes. Sections are light enough for one technician to lift, and couplers align without field drilling.
-
Flexible Wire Mesh Basket Cable Tray 50mm-600mm Width On Site Configuration
BENDIN high-strength wire cable trays offer heavy-duty steel construction with on-site cut-and-bend flexibility for custom layouts. Certified to IEC/EN 61537, NEMA VE1/VE2, CE, RoHS, and regional standards. Available in galvanized or 304/316L stainless steel, 50-600mm widths, with full accessories and test reports. -
Long Life Galvanized Cable Trunking 85um Zinc Heavy Duty Rust Resistant 2m-3m Length
BENDIN heavy-duty galvanized steel cable trays: Q235 steel with 65-85um zinc coating for 25+ years maintenance-free life. Carry up to 180 kg/m over 6 m spans. ISO 9001 & CE certified, widths 150-900 mm, custom lengths available. -
Weatherproof Galvanized Cable Trunking 900mm Width High Strength 2m-3m Section
BENDIN weatherproof galvanized cable trays use high-strength steel and hot dip galvanized finish for outdoor durability against rain, UV and temperature cycling. ISO 9001 and CE certified, with widths 100-900 mm, engineered wind load spans, and custom support spacing options. -
600mm Width Galvanized Steel Cable Tray Outdoor UV Frost Resistant 2m-3m Length
BENDIN outdoor hot dip galvanized cable trays resist UV, rain and temperature swings from -40 to +150°C. Perforated trough bases drain water and ventilate cables. Post-fabrication galvanizing protects cut ends; ISO 9001 and CE certified, with custom coating or stainless steel options for coastal sites.
